回首頁 登入/註冊 刊登徵才

南科(南部科學工業園區)工作職缺列表南科工作

南科工作職缺列表-1111南台灣提供南部科學工業園區(南科)工作機會,讓你成為科技新貴,轉職高薪不用等,現在就應徵!

南科工作 職缺共

  • 強固保全股份有限公司
    台南市新市區 工作經歷不拘 月薪28000~30000元
    1.負責門禁管制、車輛出入指揮、賣場巡邏、防竊作業及竊盜處理工作等安全維護工作 2.收發文件 3.監督及參與建築及設備之清潔、修理及維護 4.針對特定處所進行監視,維持公共安全,減少火災、竊盜或其他危險 5.控制照明、取暖、空氣調節及通風等設備
    展開
    員工生日禮金三節獎金員工結婚補助生育補助子女教育補助
  • 台達電子工業股份有限公司
    台南市善化區 工作經歷不拘 面議(經常性薪資4萬/月含以上)
    1.數據中心及子系統空調系統設計 2.空調及電力管線規劃 3.與客戶/公司內部討論產品開發需求內容 4.繪製機構設計圖面,材料選用與評估,建立BOM表
    展開
  • 立宇配管工程有限公司
    台南市永康區 工作經歷不拘 月薪28000~40000元
    1.檢測焊道 2.焊接方式,進行金屬加工 3.需穿無塵衣
    展開
    全勤獎金年節獎金年終獎金意外險員工團保
  • 宏捷科技股份有限公司
    台南市新市區 工作經歷不拘 面議(經常性薪資4萬/月含以上)
    廠務工作內容:負責機電、空調等各項基礎設施 1.廠務設備系統( 電力、空調 )之運轉維護及保養管理 2.廠務系統巡檢、異常狀況緊急處理及排除 3.廠務系統管理及公司規章SOP之制定與修改 4.廠內設備端二次配工程規劃及監工 5.主管交辦事項 6.需配合四班二輪
    展開
    產假尾牙員工在職教育訓練良好升遷制度勞保
  • 宏捷科技股份有限公司
    台南市新市區 工作經歷不拘 面議(經常性薪資4萬/月含以上)
    廠務工作內容:負責水務、氣化等各項基礎設施 1.廠務設備系統(純水、廢水、氣體 )之運轉維護及保養管理 2.廠務系統巡檢、異常狀況緊急處理及排除 3.廠務系統管理及公司規章SOP之制定與修改 4.廠內設備端二次配工程規劃及監工 5.主管交辦事項 6.需配合四班二輪
    展開
    產假尾牙員工在職教育訓練良好升遷制度勞保
  • 恩茂科技股份有限公司
    台南市善化區 1年工作經驗 月薪27000~40000元
    1. 執行ISO及技術文件撰寫及修訂 2. 協助品質系統改善 3 .訂定成品最終檢驗項目及標準 4. 提出檢具需求 5. 處理品質問題相關的客訴 6. 統計分析客訴品質狀況 7. 訂定序號編碼規則 8. 支援供應商實地評鑑 9. 執行客戶產品首件認證 10. 完成主管交辦任務
    展開
    產假年節獎金員工生日禮金年終獎金三節獎金
  • 恩茂科技股份有限公司
    台南市善化區 3年工作經驗 月薪35000元
    1.與歐美客戶洽談需求、規格 2.產品設計開發、產品功能驗證 3.機電整合 4.BOM、圖面產出、維護 5.協助代工(OEM)之改善
    展開
    產假年節獎金員工生日禮金年終獎金三節獎金
  • 1111南台灣職場小語

    在台灣,沒有照片的履歷通常會第一時間被公司跳過

  • 鴻發工程行
    台南市善化區 工作經歷不拘 日薪1500~1500元
    1.按照藍圖進行高低壓配電線路施工、電路維修及電器設備安裝 2.水電配管配線、高低壓電氣設備安裝
    展開
    員工團保伙食津貼員工定期聚餐勞保健保
  • 1.對進出廠區之人員、車輛及事物辨識盤查、登記、通報等服務工作。 2.管理現場同仁相關事務等服務工作。 3.這是一份穩定而專業成長的工作機會,歡迎有向心力及管理實務經驗的優秀朋友加入我們的菁英 團隊。
    展開
    年節獎金員工生日禮金年終獎金意外險員工團保
  • 台灣艾司摩爾科技股份有限公司
    台南市新市區 1年工作經驗 面議(經常性薪資4萬含以上)
    Location Tainan, Taiwan Degree Master Experience 0-2 years Team Customer Support Job category Electrical engineering Travel 20% Reference req10625 Introduction Within ASML the sector Customer Support (CS) is responsible for the maintenance, repair and continuous improvement of ASML systems at customer locations. One of the departments in this sector is CS HVM. The CS HVM team prepares and manages the CS part of the execution of new system maintenance of new ASML machines at customer sites. These Installations are done in close cooperation with Field Factory System Install Engineering (FF SIE) in shift schedules at customer production environment over a period of 3-4 months. Job Mission - The Customer Support Organization is responsible for the installation, qualification, repair and maintenance of the ASML systems at the customer site and is responsible for the necessary transfer of know-how to the customer. - The Customer Support Engineer (CSE), an ambassador for ASML, must be the first line of support for the repair and maintenance of the ASML Systems. - The CSE will interface with the customers, peers, local 2nd line support and staff management to assure timely and accurate support. - The CSE must be able to clearly communicate between key stakeholders of technical, organizational and operational stakeholders in relation to driving availability to their specific customer. Job Description - Analyzes, diagnoses, and troubleshoots equipment problems via telephone or at customer site. - Performs installation, repair, retrofits, upgrades and preventive maintenance on equipment installed at customer sites. - Regularly provides assistance, guidance, leadership, and technical assistance to junior or less experienced field service engineers; may serve as site leader for customer. - Maintains and manages an assigned installation equipment base. This includes providing primary support, forecasting, conducting customer support meetings, and ensuring regular communication with the customer. - Assists customers in the receipt, installation, and testing of company equipment. - Conducts equipment troubleshooting, analysis, and debugging in support of installation or operating activities. - Provides service education to customer’s service and operations staff. - Ensures that parts are available and as specified for service requirements. - Maintains appropriate tools are on hand and as required. - Travels as required for the purposes of performing service activities at customer sites or backfilling for other Field Service Engineers. - Completes service, expense reports, and other administrative responsibilities in accordance with procedures and with supervisor’s approval. - Uses company technical documentation and provides feedback for improvement. - Performs other duties as assigned. Education BS/MS major in Mechanical, Electrical/ Electro-optical, Controlling Engineering, Physics or other related fields Experience - Fab experience in the Lithography area will be a plus - Experience or knowledge of semiconductor manufacturing process is preferred Personal skills - Good communication skills and command of the English Language - Must be a strong team player, supporting & analytical skill and good working habits Context of the position At customer sites / office
    展開
  • 台灣艾司摩爾科技股份有限公司
    台南市新市區 1年工作經驗 面議(經常性薪資4萬含以上)
    RESPONSIBILITIES •Analyzes, diagnoses, and troubleshoots Cymer equipment problems via telephone or at customer site. •Performs installation, repair, retrofits, upgrades and preventive maintenance on Cymer equipment installed at customer sites. •Regularly provides assistance, guidance, leadership, and technical assistance to junior or less experienced field service engineers; may serve as site leader for customer. •Maintains and manages an assigned installation equipment base. This includes providing primary support, forecasting, conducting customer support meetings, and ensuring regular communication with the customer. •Assists customers in the receipt, installation, and testing of company equipment. •Conducts equipment troubleshooting, analysis, and debugging in support of installation or operating activities. •Provides service education to customer’s service and operations staff. •Ensures that parts are available and as specified for service requirements. •Maintains appropriate tools are on hand and as required. •Travels as required for the purposes of performing service activities at customer sites or backfilling for other Cymer Field Service Engineers. •Completes service, expense reports, and other administrative responsibilities in accordance with Cymer’s procedures and with supervisor’s approval. •Uses company technical documentation and provides feedback for improvement. •Performs other duties as assigned. QUALIFICATIONS •Excellent written & verbal communications skill. •Ability to analyze data and report problems,to complete accurate, comprehensive service reports,& to communicate technical issues to other technical staff. •Ability to collect, translate, & analyze data and take action based on effectively report problems though written and/or graphical representation of data (detailed Post-Mortem Chronological Abstracts, trending analysis, failure statistics, etc. •Advanced customer service skills, with a solid foundation in and an understanding of the importance of relationship building. •Expert level of technical knowledge of electronics. •Ability to facilitate resolution of technical challenges. •Ability to apply advanced knowledge of installation, maintenance/repair, and troubleshooting at both the module and system level. •Ability to read and analyze complex opto-mechanical and electronic schematics. •Must be able to successfully meet customer site access requirements such as: background checks, safety training, and cleanroom access (gowning and breathing apparatus). •International deployment to company or customer site anticipated during first year of employment. •Ability to travel via air and auto approximately 20% of the time, AFTER initial deployment period.
    展開
  • 台灣艾司摩爾科技股份有限公司
    台南市新市區 1年工作經驗 面議(經常性薪資4萬含以上)
    Location Tainan, Taiwan Degree Master Experience 0-2 years Team Customer Support Job category Electrical engineering Travel 20% Reference req10625 Introduction Within ASML the sector Customer Support (CS) is responsible for the maintenance, repair and continuous improvement of ASML systems at customer locations. One of the departments in this sector is CS HVM. The CS HVM team prepares and manages the CS part of the execution of new system maintenance of new ASML machines at customer sites. These Installations are done in close cooperation with Field Factory System Install Engineering (FF SIE) in shift schedules at customer production environment over a period of 3-4 months. Job Mission - The Customer Support Organization is responsible for the installation, qualification, repair and maintenance of the ASML systems at the customer site and is responsible for the necessary transfer of know-how to the customer. - The Customer Support Engineer (CSE), an ambassador for ASML, must be the first line of support for the repair and maintenance of the ASML Systems. - The CSE will interface with the customers, peers, local 2nd line support and staff management to assure timely and accurate support. - The CSE must be able to clearly communicate between key stakeholders of technical, organizational and operational stakeholders in relation to driving availability to their specific customer. Job Description - Analyzes, diagnoses, and troubleshoots equipment problems via telephone or at customer site. - Performs installation, repair, retrofits, upgrades and preventive maintenance on equipment installed at customer sites. - Regularly provides assistance, guidance, leadership, and technical assistance to junior or less experienced field service engineers; may serve as site leader for customer. - Maintains and manages an assigned installation equipment base. This includes providing primary support, forecasting, conducting customer support meetings, and ensuring regular communication with the customer. - Assists customers in the receipt, installation, and testing of company equipment. - Conducts equipment troubleshooting, analysis, and debugging in support of installation or operating activities. - Provides service education to customer’s service and operations staff. - Ensures that parts are available and as specified for service requirements. - Maintains appropriate tools are on hand and as required. - Travels as required for the purposes of performing service activities at customer sites or backfilling for other Field Service Engineers. - Completes service, expense reports, and other administrative responsibilities in accordance with procedures and with supervisor’s approval. - Uses company technical documentation and provides feedback for improvement. - Performs other duties as assigned. Education BS/MS major in Mechanical, Electrical/ Electro-optical, Controlling Engineering, Physics or other related fields Experience - Fab experience in the Lithography area will be a plus - Experience or knowledge of semiconductor manufacturing process is preferred Personal skills - Good communication skills and command of the English Language - Must be a strong team player, supporting & analytical skill and good working habits Context of the position At customer sites / office
    展開
  • 台灣艾司摩爾科技股份有限公司
    台南市新市區 7年工作經驗 面議(經常性薪資4萬含以上)
    Your Mission Our mission is to transform ASML Tainan CSNPI EUV Operation Team into a pace setting, highly effective, and fit for future operating unit. Focus is driving process development and supporting daily improvements according our agreed roadmap & priority. As part of our team, you will be driving the implementation of LEAN within CSNPI as part of the ASML-wide roll-out of LEAN. Job description You are supporting teams and team leads on daily kaizen and project kaizen; you train and coach them on LEAN methodologies. You drive sustainable growth of lean ‘way of working‘ in CSNPI, across all sectors, and you deploy a consistent use of methodology across hierarchical and process divisions. You work together with the lean experts across all CSNPI sectors, and take a leading role in lean deployments and project kaizens. Your activities include: Value stream mapping, facilitates kaizen events, Voice of the customer-workshops, prepares value stream analysis, TL, GL-coaching on daily kaizen. Drives continuous improvement of standards, quality assurance of SOP‘s, supports connecting teams in the value chain, supports and drives cross team best practice sharing, supporting visual management, gives feedback on lean practices. Personal skills You are a detailed oriented self-starter, process minded, hands-on, you are able to be dealing and cope with project management and present improvements or tradeoffs. You are a trusted advisor to the CSNPI staff. You have a broad experience in LEAN methodologies, preferably within and outside ASML.
    展開
  • 盛奇工程股份有限公司
    台南市新市區 工作經歷不拘 月薪35000元
    1.設備組裝、測試、調整、清潔、改管等設備工作 2.需能配合國內外出差 *加班費另計
    展開
    年終獎金三節獎金禮品伙食津貼國內旅遊
  • 作業員/助理工作擴大徵才!無經驗可,月薪28000起!